MGI JETvarnish 3D varnishing and foiling professional printer

MGI JETvarnish 3D

  • Перетворіть звичайні відбитки на неймовірні та привабливі друковані роботи
  • Створіть тактильний досвід на ваших відбитках
  • Додайте цінності звичайним відбиткам та диференціюйтеся на ринку
  • Створюйте блискучі металізовані ефекти на цифрових та офсетних відбитках
  • Запропонуйте бездоганне позиціонування лаку та фольги з революційним AIS SmartScanner
MGI JETvarnish 3D varnishing and foiling professional printer

Специфікації та завантаження

Специфікації та завантаження

UV Inkjet Technology
MGI’s exclusive inkjet engine technology
Drop-on-Demand (Dod) inkjet application
Piezoelectric print heads in single pass printing
Flexible & scalable architecture
Variable Coating Thicknesses
Depending on your file and the substrate used, the coating thickness
can vary from a traditional flat spot UV coating of 3 microns (μm)
up to 200 μm for 3D raised texture eff ects and a tactile finish
Production speed
Up to 3,123(1) B2 sheets size per hour for all versions
Left & right motorized registration side guides. Automatic registration
using the built-in AIS SmartSanner technology for real-time management
of entire sheet. No registration marks required
Overall registration of ± 200 microns
Min: 21 x 29.7 cm / 8.37 x 11.7’’ (width x length)
Max: 52 x 105 cm / 20 x 42’’ (standard)
64 x 120 cm / 25 x 47’’ (extended) (2)
Printable areas
51 cm / 19’’ (standard)
56 cm / 22’’ (extended)(2)
Substrate thickness
Motorized inkjet head height-adjustment
Min: 135 gsm and not less than 150 μm / 6 mil before
printing & lamination
Max: Up to 600 gsm
Substrates Compatibility
Enhancement on most(3) matte or glossy laminated surfaces, with or
without aqueous coating, layered paper, plastic, PVC and other coated
materials. Spot 3D coat directly onto most(3) digital prints (ie. MGI Meteor)
UV Coatings and Yields
Several coating formulas available, one dedicated to 2D (flat coat) and
the other for 2D/3D usage. The JETvarnish 3D comes standard with
2 coating tanks and 2 coating circuits allowing a quick changeover
between coatings. Tanks have a high capacity volume (18 liters).
“On-the-fly” tank refilling possible during production without any
interruption and no waste.
Paper Path
100% flat paper path
Vacuum feed system
Air feed system
Automatic double sheet detection
In-line UV Dryer
“On-the-fly” drying & curing via integrated UV lamps
Front End System
Intuitive touchscreen software management suite controlled
by a 27’’ monitor.
Includes functions for operators: Job cost calculator, image editor,
queue manager and reprint, printheads settings.
Dedicated controller for equipment settings and technical data.
Ethernet connection 10/100/1000 BT in RJ 45

(1) speed will vary according to printing parameter used.
(2) with the pallet feeder and stacker option.
(3) with the 75cm/29’’ Evo kit.
(4) Confirm the substrate/lamination/toner/metallic film compatibility with your Konica Minolta Representative
(5) Standard configuration
(6) require paper above 250 Gsm/250 μm.
(7) depending on the configuration selected.  
  • All specifications refer to A4-size paper of 135 gsm quality.
  • The support and availability of the listed specifications and functionalities varies depending on operating systems, applications and network protocols as well as network and system configurations.
  • The stated life expectancy of each consumable is based on specific operating conditions such as page coverage for a particular page size (5% coverage of A4). The actual life of each consumable will vary depending on use and other printing variables including page coverage, page size, media type, continuous or intermittent printing, ambient temperature and humidity.
  • Some of the product illustrations contain optional accessories.
  • Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
  • Konica Minolta does not warrant that any prices or specifications mentioned will be error-free.
  • All brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.

Завантажити брошуру щоби мати всю інформацію про обладнання під рукою

Завантажити каталог MGI

Ми на зв'язку

Залишіть свої дані та наші експерти якнайшвидше звʼяжуться з вами для уточнення всіх питань