MGI JETVARNISH 3D One

  • ВИСОКА ПРОДУКТИВНІСТЬ з технологією друку в один прохід
  • ЦИФРОВЕ обладнання для фінішного оздоблення зі швидкістю виконання завдань до 2077 відбитків формату A3 за годину
  • ТЕХНОЛОГІЯ СТРУМЕНЕВОГО ДРУКУ у поєднанні з п'єзоелектричними друкуючими головками Konica Minolta з технологією drop-on-demand (подача лаку на запит) для відмінної якості
  • AIS SmartScanner для автоматичного та точного позиціонування лаку 
  • ПРОГРАМНЕ ЗАМЕЗПЕЧЕННЯ В КОМПЛЕКТІ дозволяє відслідковувати, редагувати, створювати нові завдання для друку та передруковувати необхідні відбитки, керувати чергою та налаштовувати AIS Scanner в єдиному зручному та інтуїтивно зрозумілому інструменті
  • ЛАКУВАННЯ ОФСЕТНИХ ТА ЦИФРОВИХ ВЫДБИТКІВ з та без ламінації для гнучкого процесу виконання завдань
  • ЗМІННА ТОВЩИНА НАНЕСЕННЯ ЛАКУ від 21 до 116 мікрон для створення 2D та 3D тактильних ефектів за один прохід
  • ЕКОЛОГІЧНА LED СУШКА для вільного від озону навколишнього середовища

Упс! Обладнання більше не доступно

Натомість пропонуємо вам звернути увагу на оновлені та покращені пристрої 💪

Переглянути

Специфікації та завантаження

Специфікації та завантаження
PRODUCT SPECIFICATIONS – JETVARNISH 3D ONE
Printing technology MGI’s exclusive inkjet engine technology; Drop-on-Demand (DoD)
technology; Piezoelectric printheads,developed and manufactured
by Konica Minolta; Single pass printing; Flexible & scalable printing
architecture
Coating thicknesses Depending on your file, the inks used and the type of surface of
your sheet, the coating thickness can vary. On laminated and
aqueous coating: 21 μm – 116 μm for 3D raised effects and tactile
finish. On toner and coated paper: 30 μm – 116 μm for 3D raised
effects and a tactile finish
Production speed In 2D/flat mode: Up to 2,077 A3 sheets per hour (with 21 μm)
In 3D/raised mode: Up to 1,260 A3 sheets per hour (with 51 μm)
Up to 547 A3 sheets per hour (with 116 micron)
Registration SmartScanner coupled with Artificial Intelligence (AIS) for fully
real-time automated sheet-to-sheet registration process. No crop
marks required.
Formats Min. 21 x 29.7 cm
Max. 36.4 x 76.0 cm
Max. Printable Width 35.3 cm
Substrate thickness Min: 135 g/m2 and not less than 150 μm or 6 mil before printing
& lamination; Max: 450 g/m2 and not more than 450 μm or
18 mil before printing & lamination; Motorized height-adjustment
print heads
Substrates* Printing on most matte or glossy laminated surfaces, with or
without aqueous coating, layered paper, plastic, PVC and other
coated materials.
Varnish on toner Spot 3D One coat directly onto most digital prints with no
lamination or coating required.
UV coatings and capacity varnish delivered with a 10-litre tank capacity
High capacity
Automatic feeder
Feeder able to handle a paper pile up to 30 cm;
2,500 sheets at 135 g/m2
Paper Tray Tray able to handle a paper pile up to 15 cm or approximately
1,250 sheets at 135 g/m2
All paper formats from A4 up to 36.4 x 75 cm
Paper path 100 % flat paper path; Vacuum feed system; Air feed system;
Automatic double sheet detection; In-line LED dryer; “On-the-fly”
drying & curing via integrated LED
Maintenance &
remote technical
support
Daily maintenance completed in less than 10 minutes; Majority of
procedures are automated; Automatic cleaning system; From cold
start to production in less than 10 minutes; Remote troubleshooting
& support via included video/web camera (high speed internet
connection required)
Operator panel Integrated user-friendly LCD touch-screen
Dimensions (L x W x H) 4.02** x 1,41 x 1,80; 1 metre clearance required on all 4 sides
Weight ± 1,200 kg
Electrical
requirements
V: 220-240V 50-60Hz; A: 20; plug: 2 plugs CEE 17 IP44 32A (32A
250V, 1P+N+PE); RCD 30mA; C curve 32A breaker
Operating Temperature: 18 to 30°C
Environment Relative humidity: between 30 – 55% (no condensation)
Respecting the
environment
Eliminates resource waste (wasted electricity, paper and varnish);
No plates (offset) or screens (screen printing); No cleanup or preparation
between jobs; Drastic reduction in amount of consumables
and use of bulk packaging; Coating without volatile solvent.
Options Automatic PDF File Converter; VDP barcode camera;
AIS SmartScanner Lighting for metallized substrates

The default sheet format is A3, unless otherwise stated
1) with an additional option installed
2) speed will vary according to printing parameter used
3) confirm substrate/toner compability with KM
* The used substrate needs to be either coated or laminated.
Otherwise the media is absorbing the varnish and the desired effect might get lost.
** No paper extensions available.
 

  • All specifications refer to A4-size paper of 135 gsm quality.
  • The support and availability of the listed specifications and functionalities varies depending on operating systems, applications and network protocols as well as network and system configurations.
  • The stated life expectancy of each consumable is based on specific operating conditions such as page coverage for a particular page size (5% coverage of A4). The actual life of each consumable will vary depending on use and other printing variables including page coverage, page size, media type, continuous or intermittent printing, ambient temperature and humidity.
  • Some of the product illustrations contain optional accessories.
  • Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
  • Konica Minolta does not warrant that any prices or specifications mentioned will be error-free.
  • All brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.

Завантажити брошуру щоби мати всю інформацію про MGI JETVARNISH 3D One під рукою

Брошура MGI JETVARNISH 3D One

Завантажити каталог щоби мати всю інформацію про обладнання MGI під рукою

Завантажити каталог MGI

Заплануйте візит у шоурум

Ми презентуємо не лише цифрові машини, а й увесь парк наявного устаткування та програмного забезпечення для різних напрямів діяльності у поліграфічній галузі